The Virtual Foundry
Ceramic Filamet™ Sample
Ceramic Filamet™ Sample
Couldn't load pickup availability
Create real ceramic parts using any open-architecture FFF/FDM 3D printer—or even a 3D printing pen.
Available Formats:
1.75mm and 2.85mm diameters in 100g weight
| Ceramic Load By Mass |
Recommended Nozzle | Filament Density (g/cc) | |
|---|---|---|---|
| Basalt Moon Dust | 60.0 – 62.0% | 0.6mm Hardened Steel | 1.60 – 1.75 |
| Porcelain | 48.0 – 52.0% | 0.6mm Hardened Steel | 1.40 – 1.50 |
| Rapid 3DShield Boron Carbide | 50.0 – 60.0% | 0.6mm Hardened Steel | 1.30 – 1.50 |
| Silicon Carbide | 63.0 – 66.0% | 0.6mm Hardened Steel | 1.88 – 1.95 |
| Zirconium Silicate (Zircopax®) | 64.0 – 69.0% | 0.6mm Hardened Steel | 2.10 – 2.19 |
Samples are packaged spooless.
High Compatibility:
Works with virtually any open-architecture 3D printer—no proprietary hardware or specialized equipment required. Also compatible with 3D printing pens.
👉 Our list of Trusted 3D Printers – Click Here
Easy Printing Experience:
-
Prints similar to PLA
-
Minimal to no warping
-
Ensure the filament feeds straight into the extruder
-
Less hygroscopic than PLA
-
Do not dry this filament—drying will degrade the binder
👉 More information on printing – Click Here
Fully Sinterable:
Most of our ceramic filaments are fully sinterable. After printing, your part can be fired in a furnace to become 100% ceramic.
👉 Debinding & Sintering Instructions for tested materials – Click Here
Additional Links:
👉 SDS and TDS – Click Here
👉 Research Papers – Click Here
All materials print just like PLA on most open-architecture 3D printers.
Recycle empty spools with the spool buy-back program – Click Here
Large orders may be subject to longer lead times. Contact us for more accurate lead times.
Contact Us
Contact Us
Questions? Problems? We are here to help. We promise to respond to you within 8 hours!
Stifle LLC
CONTACT@GOLDANDSILVERTESTING.COM
Toll free: 1-800-757-3935
